PTFE Coatings, TEFLON Coatings, ETFE Coatings, FEP Coatings, PVDF Coatings, HDPE Coatings, LDPE Coatings, PTFE Linings, TEFLON Lining, PVDF Lining, HDPE Lining, LDPE Lining, India

PTFE Coatings, TEFLON Coatings, ETFE Coatings, FEP Coatings, PVDF Coatings, HDPE Coatings,  LDPE Coatings, PTFE Linings, TEFLON Lining, PVDF Lining, HDPE Lining, LDPE Lining, India

PTFE COATINGS PTFE COATINGS


PTFE COATINGS :


Non-stick, self lubricating corrosion resistant, chemical resistant.


PTFE Coating gives unmatched qualities with unique combination of properties. 
PTFE Coating can be widely used to reduce the friction resistance due to its low 
coefficient of friction. It is non-stick, self-lubricating, non-wetting, non-toxic. 
Very good corrosive resistance to almost all chemicals. Very good heat resistant 
and has cryogenic stability. All these properties of PTFE Coating increase the 
performance and production cost of material. 
 
Nut Bolts Fasteners Coatings

PTFE / TEFLON, XYLAN coating on Nuts & stud bolts significantly reduce the amount of make up torque lost to friction, Removing much of the uncertaninty from predicting clamp loads. Also eliminates the problem of galling which occurs with Metals such as stainless steel. Resist corression In and sea water and and in cghemical environment. This prevents nuts from freezing & Significantly reduce Break-out Torque.
 
   
This coating of Teflon / PTFE gives bearing effect that is reduces friction, making operations smoother and easoer and completly eliminates and squeaks. That developes Dry Lubrications.
 
 
   
Non-Stick :- Thin coating of Industrial non stick range embraces a diversity of applications including long lasting coatings For release iof Rubbers & Plastic moulds, Heat Sealing Blades, Sweet Moulds Toffee Cutters, Hoppers, Chutes in Pharmaceuticals, Packaging, Food & Bakery Industry.
 
Chemical & Corrossion Resistance :
This Coating & Lining on Pipes, Pipe Fittings, T joints, Elbows, Reducers, reduces corrossion by chemicals cfeating thickness from 0.8 to 3 mm.
   
0.8 to 1mm coating thickness given on Agitators Impellers for avoiding Corrosion by chemicals.
   
 
0.8 to 1mm coating / linlng given on Reaction vessels, Tanks, Jacketted vessels & its fittings. For corrosion & chemicals resistance like, acids / alkalies etc.

1mm to 3mm lining given on vessels / Tanks, Agiators, impalers for highly corrosive chemicals Acidsand Alkalis.
 
PTFE / Teflon coating on Thin diaphragms are used idiaphragms valves to avoid corrisson by chemicals in chemical Industry.
   
Coating on sensors is given protect from acids and alkalies in chemical industry.
   
Thermowels are also coated with Teflon / PTFE to avoid corrosion by chemicals & its fumes. Otherwise Hastalloy like costly material has to be used to avoid corrossion.